Understanding the Process of Wooden Floor Sanding

Perhaps it would be good to describe first what floor sanding literally means. Well, the process involves removing the upper surfaces of a wooden floor by sanding the surface with abrasive materials. Homeowners have adopted wood flooring because it is more attractive and increases the aesthetic value of homes. Experts for floor sanding Hornsby has to offer aim at helping you maintain your wooden floor.

floor sanding hornsby

Genuine wood requires time-to-time renovations to make it remain perfect. Sanding is one of the techniques to achieve that objective. Professionals for floor sanding Hornsby has to offer use sanding techniques to deal with a wide range of wooden floors including particleboard, timber, cork, and parquet. Each floor requires a different level of sanding process, which is why it is advisable to obtain relevant support from professionals for floor sanding Hornsby currently provides.

The process of floor sanding

The process mainly involves three stages as follows:

•    Preparation

It is the first stage of the floor sanding process. If the floor is being renovated, it is advisable to extract the previous covering first. It is also important to remove nail heads that protrude above the boards since they can damage the sanding machines.

•    Sanding

To make the floor level, experts use coarse-grit papers to remove existing coatings. For example, 40-grit is the most preferred paper to execute the first cut. There are no height differences between the boards. The edges are used to sand areas that larger sanders cannot reach. The second cut involves 80-grit papers, which is complemented by the belt sander. The experts then use a finishing machine to wind up sanding the floor and to create a desirable look.

•    Coating with a new protective finish

 For a protective finish, Hornsby floor sanding experts use sealants to coat the floor and to provide safety from challenges such as temperature and foot traffic. During this process, the security of the contractors should be a concern since oil-based sealants are great health hazards: they should wear a respirator mask.

Other services offered

The best floor sanding in Hornsby comes along with other services to suit the needs of a client. These services include timber flooring, recycling, and wood decking. The ability to supply and install materials required in floor sanding is a big boost to both the service providers and potential clients. The contractors remain in a position to give necessary advice and work with the budget of customers.

Issues that may arise during sanding

Usually, different timber species provide different levels for sanding. This means that there is a limit to observe when sanding these floors.

You should also keep in mind that when sanding old boards, in some cases they might expose worm-eaten cores that ruin the appearance of the floor.

Conclusion

However, although some people may consider sand flooring an expensive project, it is worth the investment. For one, it increases the resale value of your property and if maintained well, it can last a lifetime. You can read articles, magazines, and visit the website for you to acquire more information on floor sanding and above all consult specialists to make an informed decision. Please visit http://www.ajflooring.com.au/floor-sanding-hornsby.